 |
| Batch
Control Systems
|
 Ideally
suited for: CHEMICAL PACKAGING / WASTE WATER
TREATMENT / CHEMICAL MANUFACTURING / PLATING
/ SEMI-CONDUCTOR / PHARMACEUTICAL/ AGRICULTURE
STANDARD PUMP's Batch Control Systems are engineered to control, measure
and dispense any volume of liquid from drums, IBCs, plating tanks and any
large storage vessel. They can be used in any industry where batching,
chemical packaging or dilution is required to be accurate and efficient.
OPERATION
Simply enter the desired volume of liquid with the directional arrows.
Press ENTER and the Batch Control System engages the motor, dispenses the
required volume, then stops the motor to complete the process.
ADVANTAGES
- Accuracy — within ±0.5%. Meter employs "Teach In" calibration
or preset "K factors" for various specific gravities. No more estimating
or using floor scales to properly measure corrosive chemicals.
- Safety — operator does not come in contact with corrosive
chemicals. No more drum tilting with fork lifts, measurement with buckets
or pails. Control transfer of highly corrosive liquids from your storage
container to a mixing tank or process line.
- Memory — Save up to 7 preset volumes in the Automatic Batch
memory or change each batch in the Manual Batch setting.
- Versatility
- Displays volume units in gallons, Imperial gallons, liters,
milliliters or cubic meters.
- Displays flow rate in gallons, Imperial gallons, liters, milliliters
or cubic meters per minute, second, or hour.
- Language can be displayed in English, German, French, Italian
or Spanish, as desired.
- Available in PP or PVDF for complete chemical compatibility.
- Available with standard pump tube lengths of 27" (700 mm) carboys,
39" (1000 mm) drums, 47" (1200 mm) tanks, 60" (1500 mm) IBCs
and 72" (1600 mm) large storage vessels
- Batch Controller operates on 120V or 220V power.
- Batch Control Motors are available in TEFC or ODP for any corrosive
environment. Both 60 Hz and 50 Hz motors are available.
- Efficient — system operates up to 25 GPM. Faster transfer
and measurement of liquid increases productivity and lowers downtime.
- Quick connection — 1" hose barb or 1" NPT thread for ease
in hose change or quick disconnect setup.
 TECHNICAL
DATA
- Maximum temperature — 175°F (80°C)
- Maximum flow — 25 GPM (95 l/min)
- Suction dimension — 1.63" (41 mm)
- Maximum specific gravity — 1.89
- Maximum viscosity — 1,500 cps
- Discharge dimension — 1" (25.4 mm) hose barb or NPT thread
|
Return to Top of Page
|
|
 |
|
|
